Off Shore Tackle OR36 1 Tadpole Resettable Diving Weight

You simply use this Tadpole weight to get your lure down deeper and it trips when a fish is on. This item is powder coated for long lasting durability.

Off Shore Tackle ORRP8SN Replacement Pads

Replacement pads for OR18 releases.

Off Shore Tackle Spring

For OR12TF.

Off Shore Tackle OR12TFEK Tattle Flag™ Economy Kit - No OR16s OR Flag Included
(For use on OR12L and OR12R)

You must have an OR12 Side Planer AND two OR16 (Red) Pro Clips that you previously purchased in order to use this Economy Kit for converting your OR12 to a Tattle Flag™ Board as they are NOT supplied with this item. Without these items, IT WILL NOT WORK.

Each kit includes wire, spring, washer, screw eye, split ring, 6/32 screw and limited instructions. One kit will upgrade one OR12 Side Planer with the two OR16’s you purchased previously.

Off Shore Tackle OR19 & OR19BWW Adjustable Heavy Tension Planer Board Release

This release comes as standard equipment on the OR12 Side Planer along with the OR31 Side Planer SST and is ideal for Striper, Salmon, Trout, and Muskie using 10-25 pound test monofilament and lead core.

The Offshore OR-3 light tension release is ideal for walleye fishing in choppy water or brown trout using 10-25 pound test monofilament. The OR-3 release was designed for multiple lines and surface trolling with planer boards. 2 releases per pack.

This release is ideal for Walleye fishing in choppy water or Brown Trout using 10-25 pound test monofilament.

Sits upright in the water with no forward motion allowing you to troll at extremely slow speeds. Reversible so it can be run either port or starboard. Bright yellow with fluorescent orange flag that folds down for easy storage.

The Off Shore OR-1 is a medium tension release ideal for salmon, steelhead, and trout when using 10-25 pound test monofilament line. The medium spring tension of the OR-1 release is best for deep water and or good size fish. You can add additional tension by placing the line deeper into the pads.

Off Shore Tackle OR14 & OR14BWW Adjustable Medium Tension Planer Board Release

This release is ideal for Walleye fishing in choppy water or Brown Trout using 10-25 pound test monofilament.

Off Shore Tackle OR18 Snapper Adjustable Tension Planer Board Release
With the wide range of tension settings this release is ideal for Walleye, Striper, Salmon, Steelhead, Trout, and Muskie. For use with super lines, lead core as well as monofilament.

Big Jon's 8 inch "Otter" is a great asset to have in your tackle box! This  in-line planer will take your lure out from the sides of your boat. The Otter  attaches directly to your fishing line, so there is no need for a planer mast.  Just place the Otter in the water, let out your line and place your rod in a rod  holder.

10" x 3 1/2" with adjustable keel weight to keep the nose tracking straight when using deep divers or snap weights. Catamaran nose keeps it above the waves and specially coated clip holds braids, fused lines, and ultra thin mono.

Off Shore Tackle OR20 Pro Weight System

Each system includes instructions, four OR16 Pro Snap Weight Clips, four split rings, two of each of the following Pro Guppy Weights: 1/2 oz., 3/4 oz., 1 oz., 1 1/2 oz., 2 oz., and 3 oz. all contained in a plastic tackle box. The design of the guppy weights allow the angler to run the weights as a snap weight or as an in line weight.

Add this Half Weight Keel along with the existing keel to aid in pulling  heavy lures, wire, Lead-Core and Copper lines. The additional weight and surface area  helps the Otter Boat track further away from your boat. This is for a Single Keel Weight.

This release is ideal for Muskie, Salmon, Pike and salt water fish using over 20 pound test monofilament line.

If you want to custom build your own planer system, you're in luck! You can mount Big Jon's Planer Pulley to any mast, rail or radar arch that is 7/8 inch to 1 1/2 inches in diameter.

Pro-Pack includes 1 Walleye Board Starboard, 1 Walleye Board Port and two Double Action Flag Systems.

Big Jon Sports offers the most advanced design in planers on the market! The  Otter Boat is a revolutionary concept that employs improved hydrodynamics. The  Otter Boat will gain greater distance from your boat than the old fashion  skis.

Big Jon's Dual Manual Planer Reel has been long regarded as "The Industry Standard"; for good reason, it is constructed from high-strength plastic! You won't find a sturdier set of reels on the market today.

This release is ideal for Salmon, Steelhead, Trout, and Muskie using 10-25 pound test monofilament line. It can also be used to pull lead core, snap weights, and deep diving crank baits.

Big Jon's Dual Manual Planer Rigger has been long regarded as "The Industry Standard"; for good reason, it is constructed from high-strength aluminum! The 1 1/2 inch diameter tubing used for the mast has a 1/8th inch wall thickness! You won't find a sturdier mast on the market.

You won't find a sturdier mast on the market. The 8 inch reel features an adjustable disc clutch and comes wound with 150 feet of highly visible, 135 pound test tow line per reel. The tow line has been fitted with a swivel clip, ready to attach to your planer.

The Dual Electric Planer Reels feature "High Torque" 12 volt, sealed motors with remote switches and adjustable disc clutches. The reels come wound with 150 feet of highly visible, 135 pound test tow line. The tow lines have been fitted with swivel clips, ready to attach to your planers.

The Dual Reel Planer comes with rugged Great Lakes Planers all aluminum reels and pulleys that are 100% adjustable on a 6' mast. The reels are pre-spooled with 150' of 200 lb dacron tow line. The mast may be cut down to any size the angler prefers. Once the bases are bolted into place the mast can be attached or removed in seconds.