The Tite-Lok Plate Mount is an aluminum plate that can be mounted in multiple places on your boat so you can easily add a rod holder where you need it. This plate mount comes with a black protective boot so it won't scratch up your boat. All Tite Lok rod holders fit this mount.

BERT'S CUSTOM TACKLE

NEW STYLE THUMB SCREW KIT

MF3489

Bert's Custom Tackle New Style Blackened Thumb Screw Kit - 4 per pack

Cap Kit. Fits all of Bert's tube style rod holders, and their competitors.

Tite-Lok Rod Holder Caps are replacement caps that fit tube-style rod holders with ease. These caps are black in color.

The Scotty 280 bait caster / spinning rod holder holds a bait caster rod & rel in a cushioned cradle while a slot in the front allows for a spinning set-up.  Accommodates either a trigger stick or pistol grop rod butt and is fully adjustable up and down.  Rotates a full 360 d. and includes a #241 combination deck / side mount.

• Positive locking, open style rod holder
• Fiber reinforced engineering grade nylon provides strength, resilience and reliability
• Universal cradle for holding any reel style
• Front locking ring prevents rod loss when traveling
• Includes side/deck mount for mounting on flat deck surfaces or on the side of a gunnel or transom
• Interior diameter: 1.95 in
• Mount dimensions: 4 in x 2 in x 2 in
• Bolting dimensions: 1 5/16 in x 3 3/16 in

The Power Lock series rod holder is Scotty's most popular, value priced open style rod holder. Fibre reinforced engineering nylon offers strength, resilience, and reliability. Rotates 360 d. and includes a #241 combination deck / side mount.

Bert's Custom Tackle Transducer Mounting Board-Dolphin Gray (MF3263)

Fits square or round rails up to 1-1/4". Includes 4 bolts

The Big Jon clamp-on rod holder is constructed of thick wall aluminum with a protective vinyl cap to prevent wear to rod handles.  Designed to clamp on to J-rod style downriggers.

Berts Rod Holder Tracks: Berts single track is the foundation of their trolling rod mounting system. Tracks include mounting directions, end caps and stainless steel hardware. All Bert's Custom Tackle accessories mount in this track allowing for modular rigging. Tracks have a satin finish.

The Tite-Lok Sure-Set Rod Holder with Plate Mount boasts machined anodized aluminum construction and heavy-duty durability. The Tite-Lok Sure-Set Rod Holder with Plate Mount (Model 5622) features the 5620 series tube type rod holder and the 5602 Plate Mount. The rod holder hinges back for quick follow through when setting the hook.

The Tite-Lok Sure-Set Rod Holder with Plate Mount boasts machined anodized aluminum construction and heavy-duty durability. The Tite-Lok Sure-Set Rod Holder with Plate Mount (Model 5622) features the 5620 series tube type rod holder and the 5602 Plate Mount. The rod holder hinges back for quick follow through when setting the hook.

The Multi-Lok Rod Holder with Plate Mount from Tite-Lok boasts machined anodized aluminum construction and heavy-duty durability. The Multi-Lok Rod Holder features adjustable angle settings and rotates to twelve positions. This will give you the ability to fine tune the rod placement on your boat.

• Black HDPE Top
• Machined to accommodate pliers, hooks, filet knifes
• Anodized aluminum and stainless steel base

The Tite-Lok Rail Mount Rod Holder boasts machined anodized aluminum construction and heavy-duty durability. The Tite-Lok Rail Mount Rod Holder Model 5716 features the 5710 series tube style rod holder and the 5606 Rail Mount. The rod holder adjusts and locks into a full range of positions from vertical to horizontal.

BERT'S CUSTOM TACKLE

BLACK PLASTIC RATCHETING ROD HOLDER

MODEL MF3237

Getting more rods in the water helps you to catch more fish. It's easier with the New Bert's Custom Tackle Plastic Rod Holder. It works like their award winning heavy-duty metal ratcheting rod holder. "Built Bert's tough" made of Lexan and stainless steel components.

5 ratcheting vertical positions just like our original along with 8 ratcheting horizontal positions allowing you to fine tune your rod presentation. Comes standard with gimbal rod pin. Bert's base can mount in the track both vertically and horizontally or utilize (4) through-bolt holes to mount directly to any surface. Made from tough Lexan. One handed push button operation. Track not included.

The Big Jon multi-set rod holder is constructed of thick wall aluminum with a protective vinyl cap to prevent wear to rod handles.  Adjusts to 9 positive locking positions with just one hand and includes a solid machined aluminum base and mounting track.

The Bert's Custom Tackle Fixed Mount Downrigger Base is constructed of stainless steel and anodized aluminum. This base is weather and corrosion resistant making it great for freshwater or saltwater applications.

The Scotty 256 triple rod holder is made from fibre reinforced engineering nylon and features a built-in lure and accessory rack giving you quick and easy access to your lures and tools. Includes 3 #230 Power Lock rod holders and #241 combination deck / side mount.

Bert's Custom Tackle Rod Holder RATCHET-BUFF BRIGHT (MF3098)

The Big Jon heavy duty deck mount rod holder is constructed of thick wall aluminum with a durable vinyl cap to prevent wear to rod handles.  Features a machined solid aluminum 4" x 4" base and adjusted to 7 positions with a locking pin.  Best suited for fishing with diving disks that can put a lot of torque on a rod holder.

The Bert's Custom Tackle Swivel Mount Downrigger Base is constructed of stainless steel and anodized aluminum. This base is weather and corrosion resistant making it great for freshwater or saltwater applications.

The Drift-Pack is our newest product. The drift pack is designed for the angler that uses current to present live bait and artificials as an effective tactic for catching fish. The drift pack can be used as a traditional rod holder or when drift fishing with multiple rods with maximum rod tip separation.

The Triple Rod Holder with Plate Mount from boasts machined anodized aluminum construction and heavy-duty durability. This rod holder system is great for use with planer boards and can be installed on any flat surface. The Triple Rod Holder with Plate Mount features three rod holders with adjustable six angle settings and rotation positions of 360 degrees. This will give you the ability to fine tune the rod placement on your boat. The included Plate Mount allows for the entire setup to be removed when not in use. Each rod holder tube is approximately 10 3/4" deep and has an outside diameter of 2". The plate measures 4 3/16" by 3 3/16" and is 1/4" deep.

The Bert’s Swivel Rod Tree mounts in as small as a 6″ Bert’s Track on the port or starboard gunwale of your boat.